Snowboard Width 0/90 Fiberglass Roll

18oz./sq.yd (607gsm) biaxial 0/90 fiberglass is a popular reinforcement where you don't want much torsional stiffness. This can make for a more playful or forgiving flex. Lengthwise this is a similar stiffness to our 19oz triaxial fiberglass. Always use a reinforcement layer above and below your core. This E-glass reinforces the snowboard in the 0 (down the length) and 90 (across the board) directions. "Bending" flex is resisted with a tensile stiffness of 61.6 while "twisting" flex is resisted with a torsional stiffness of 8.8. For more detailed specs, view the data sheet under Documents.

This fiberglass has a stitched edge finish, is typically 13.5 inches (343mm) wide, and 360 feet (109.7m) long. Rolls can vary in width (see tolerances); contact us if you need a closer measurement.